Journal Publications

160. Hasrati, E., Jain, A., ‘Steady State in a One-Dimensional Phase Change Problem with Hot and Cold Conditions Imposed at the Two Ends,’ Int. Communic. Heat Mass Transf., in press, 2025. (DOI: 10.1016/j.icheatmasstransfer.2024.108502).

159. Abbas, M., Jain, A., ‘Surrogate Modeling Based Analysis of Concentration Decay in Diffusion-Reaction Mass Transfer Problems,’ J. Heat Mass Transf., in press, 2025. (DOI: 10.1115/1.4067422).

158. Narasimhan, A., Rao, R., Jain, A., ‘Theoretical and Simulations Based Investigation of Heat Transfer and Thermal Runaway in Power MOSFET Devices,’ IEEE Trans. Components Packag. Manufac. Technol., in press, 2025. (DOI: 10.1109/TCPMT.2024.3515012).

157. Tavkari, D., Ganesan, V.V., Amgai, S., Jain, A., Davidson, P., ‘Thermal Characterization of Xenon-Arc Flash Lamp Heating System For Automated Fiber Placement (AFP) of Thermoplastic Composites,’ Composites Part A (Special Issue: Additive Manufacturing of Composites), 190, pp. 108658, 2025. pdf

156. Jain, A., Krishnan, G., ‘Thermal Spreading in a Multilayer Geometry with Convective Cooling Along the Side Wall of Each Layer,’ Int. J. Heat Mass Transf., 236, pp. 126253:1-13, 2025. pdf

155. Zhou, L., Li, S., Jain, A., Sun, G., Chen, G., Kang, J., Guo, D., Zhao, Y., ‘Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II,’ ASME J. Electrochem. Energy Conv. Storage, 22, pp. 041002:1-10, 2025. pdf

154. Talele, V., Ahmadian-Elmi, M., Jain, A., Mishra, D., Zawodzinski, Jr., T., Zhao, P., ‘Simulation and Reduction of Nonuniform Capacity Fading in a Cylindrical Battery Module via Reciprocating Thermal Design,’ J. Energy Storage, 103, pp. 114143:1-20, 2024. pdf

153. Jain, A., Krishnan, G., ‘Stability Analysis of a Multilayer Diffusion-Reaction Heat Transfer Problem with a Very Large Number of Layers,’ Int. J. Heat Mass Transf., 231, pp. 125769:1-12, 2024. pdf

152. Jain, A., Pontrelli, G., McGinty, S., ‘Laplace Transform Based Modeling of Drug Delivery with Reversible Drug Binding in a Multilayer Tissue,’ Pharm. Res.,  41, pp. 1093-1107, 2024. pdf

151. Krishnan, G., Jain, A., ‘Heat Transfer Analysis of Edge Cooling of a Stack of Li-ion Pouch Cells with a Heat Spreader,’ Int. J. Heat Mass Transf., 229, pp. 125606:1-11, 2024. pdf

150. Hasrati, E., Jain, A., ‘Phase Change in a One-Dimensional Functionally Graded Material,’ Int. J. Heat Mass Transf., 226, pp. 125425:1-11, 2024. pdf

149. Jain, A., Krishnan, G., Hasrati, E., ‘A Heaviside Functions Based Technique to Solve Multilayer Transient Thermal Conduction Problems,’ Int. Communic. Heat Mass Transf., 154, pp. 107323:1-13, 2024. pdf

148. Ganesan, V., Adnan, A., Jain, A., ‘Effect of Crack Tip Geometry and in situ Compression Rolling on Fracture Failure Mechanisms in Poly-Lactic Acid (PLA) Extrusion-Based Additive Manufacturing,’ Prog. Additiv. Manuf., in press, 2024. DOI: 10.1007/s40964-024-00586-0

147. Jain, A., ‘Thermal Spreading/Constriction from an Isothermal Source into a Multilayer Orthotropic Semi-Infinite Flux Tube,’ J. Heat Mass Transf., 146, pp. 061401:1-14, 2024. pdf

146. Mishra, D., Tummala, R., Jain, A., ‘Simulations-Based Investigation of the Effectiveness of Fire Suppression Techniques for Safe, Large-Scale Storage of Li-ion Batteries,’ J. Energy Storage, 84, pp. 110870:1-12, 2024. pdf

145. Krishnan, G., Jain, A., ‘Heat Transfer and Spreading in a Finite-Thickness Cylindrical Body with Spatially Varying Convective Cooling Along the Side Wall,’ Int. J. Heat Mass Transf., 224, pp. 125280:1-12, 2024. pdf

144. Bar-Kohany, T.¹, Jain, A.,¹ ‘Dissipation of Boundary Effects in Multi-layer Heat Conduction Problems,’ Int. J. Heat Mass Transf., 223, pp. 125207:1-13, 2024. (1 = Equal contributors). pdf

143. Hasrati, E., Jain, A., ‘Dual-Sided Melting of a One-Dimensional Composite Wall comprising Two Distinct Phase Change Material (PCM) Layers,’ Int. Communic. Heat Mass Transf., 151, pp. 107207:1-19, 2024. pdf

142. Hasrati, E.¹, Krishnan, G.¹, Jain, A., ‘Analytical Modeling of Phase Change in a Composite Wall Comprising Two Distinct Phase Change Materials in Series,’ Int. J. Heat Mass Transf., 222, pp. 125055:1-16, 2024. pdf

141. Jain, A., Krishnan, G., ‘Thermal Stability of a Two-Dimensional Multilayer Diffusion-Reaction Problem,’ Int. J. Heat Mass Transf., 221, pp. 125038:1-11, 2024. pdf

140. Jain, A., ‘Thermal spreading resistance from an isothermal source into a finite-thickness body,’ Int. J. Heat Mass Transf., 220, pp. 24946:1-10, 2024. pdf

139. Salvi, S., Surampudi, B., Swarts, A., Sarlashkar, J., Smith, I., Alger, T., Jain, A., ‘Experimental and Theoretical Analysis of Immersion Cooling of a Li-Ion Battery Module,’ ASME J. Electrochem. Energy Conv. Storage, 21, pp. 041001:1-10, 2024. pdf

138. Zhou, L., Li, S., Jain, A., Chen, G., Guo, D., Kang, J., Zhao, Y., ‘Lithium Battery Thermal Management Based on Lightweight Stepped-Channel Liquid Cooling,’ ASME J. Electrochem. Energy Conv. Storage, in press, 2023. (DOI: 10.1115/1.4063848).

137. Zhou, L., Parhizi, M., Jain, A., ‘Analysis of Multilayer Cylindrical Thermal Conduction with a Time-Varying Convective Boundary Condition,’ ASME J. Heat Mass Transf., 146, pp. 031003:1-12, 2024. pdf

136. Krishnan, G., Jain, A., ‘Heat Transfer in a Vertically Integrated Semiconductor Device with Unequal Layer Widths,’ Int. J. Heat Mass Transfer, 217, pp. 124708:1-14, 2023. pdf

135. Mishra, D., Hasrati, E., Jain, A., ‘Thermal Management of Li-ion Cells for Improved Safety and Performance: A Review,’ Annu. Rev. Heat Transf., 26, pp. 131-176, 2023. pdf

134. Hasrati, E., Jain, A., ‘Approximate semi-analytical technique based on eigenfunction expansion for  phase change heat transfer in a cylindrical body contained within a thick multilayered annular wall,’ Int. Communic. Heat Mass Transf., 148, pp. 107000:1-15, 2023. pdf

133. Zhang, L., Chen, Y., Ge, H., Jain, A., Zhao, P., ‘Radiation induced thermal runaway propagation in a Li-ion battery pack: Non-monotonicity, chemical kinetics, and geometric considerations,’ Appl. Sci. (Special Issue on Applied Thermal Engineering), 13, pp. 8229:1-18, 2023. pdf

132. Mishra, D., Tummala, R., Jain, A., ‘Investigation of Propagation of Thermal Runaway during Large-Scale Storage and Transportation of Li-ion Batteries,’ J. Energy Storage, 72, pp. 108315:1-11, 2023. pdf

131. Abbas, M., Torabi, M., Jain, A., ‘Transient Thermal Management Characteristics of a Porous Fin with Radially Outwards Fluid Flow,’ Int. J. Heat Mass Transfer, 214, pp. 124435:1-12, 2023. pdf

130. Jain, A., King, D., Pontrelli, G., McGinty, S., ‘Controlling release from encapsulated drug-loaded devices: insights from modeling the dissolution front propagation,’ J. Control. Release, 360, pp. 225-235, 2023. pdf

129. Krishnan, G., Jain, A., ‘Transient Temperature Distribution in a Multilayer Semiconductor Device with Dynamic Thermal Load and Non-Uniform Thermal Contact Resistance Between Layers,’ Int. J. Heat Mass Transfer, 214, pp. 124374:1-12, 2023. pdf

128. Golab, E., Vahedi, B., Jain, A., Taylor, R.A., Vafai, K., ‘Laminar forced convection in a tube with a nano-encapsulated phase change materials: Minimizing exergy losses and maximizing the heat transfer rate,’ J. Energy Storage, 65, p. 107233:1-17, 2023. pdf

127. Jain, A., Abbas, M., Torabi, M., ‘Steady state thermal analysis of a porous fin with radially outwards fluid flow,’ Int. J. Heat Mass Transfer, 209, pp. 124109:1-12, 2023. pdf

126. Jain, A., ‘Analysis of a diffusion-reaction heat transfer problem in a finite thickness layer adjoined by a semi-infinite medium,’ Int. J. Heat Mass Transfer, 205, pp. 123919:1-11, 2023. pdf

125. Farhang, B., Tanrikulu, A., Ganesh-Ram, A., Jain, A., Amerinatanzi, A., ‘Electromagnetic field-assisted laser welding of NiTi to stainless steel: Towards a lightweight, high-strength joint with preserved properties,’ J. Mater. Proc. Tech., 314, pp. 117388:1-13, 2023. pdf

124. Chaurasiya, V., Singh, J., Jain, A., ‘Numerical study of a non-linear porous sublimation problem with temperature-dependent thermal conductivity and concentration-dependent mass diffusivity,’ J. Heat Mass Transfer, 145, pp. 072701:1-12, 2023. pdf

123. Chaurasiya, V., Singh, J., Jain, A., ‘Analytical study of a moving boundary problem describing sublimation process of a humid porous body with convective heat and mass transfer,’ J. Therm. Analysis & Calorimetry, 148, pp. 2567-2584, 2023. pdf

122. Jain, A., ‘The Role of Thermal Effusivity in Heat Exchange Between Finite-Sized Bodies,’ Int. J. Heat Mass Transfer, 202, pp. 123721:1-9, 2023. pdf

121. Salvi, S., Jain, A., McGinty, S., Pontrelli, G. ‘Modeling dual drug delivery from eluting stents: the influence of non-linear binding competition and non-uniform drug loading,’ Pharm. Res., in press, 2022. pdf

120. Krishnan, G., Jain, A., ‘Heat Transfer in a Multi-Layered Semiconductor Device with Spatially-Varying Thermal Contact Resistance between Layers,’ Int. Communic. Heat Mass Transfer, 140, 106482:1-11, 2023. pdf

119. Krishnan, G., Jain, A., ‘Theoretical Analysis of a Two-Dimensional Multilayer Diffusion Problem with General Convective Boundary Conditions Normal to the Layered Direction,’ Int. J. Heat Mass Transfer, 202, pp. 123723:1-10, 2023. pdf

118. Mishra, D., Zhao, P., Jain, A., ‘Thermal Runaway Propagation in Li-ion Battery Packs Due to Combustion of Vent Gases,’ J. Electrochem. Soc., 169, pp. 100520:1-10, 2022. pdf

117. Jain, A., Subbarao, K., McGinty, S., Pontrelli, G., ‘Optimization of initial drug distribution in spherical capsules for personalized release,’ Pharm. Res., 39, pp. 2607-2620, 2022. pdf

116. Parhizi, M., Jain, A., ‘Theoretical modeling of solid-liquid phase change in a phase change material protected by a multilayer Cartesian wall,’ Int. J. Heat Mass Transfer, 197, pp. 123330:1-16, 2022. pdf

115. Krishnan, G., Jain, A., ‘Diffusion and reaction in a two-dimensional multilayer body: Analytical solution and imaginary eigenvalue analysis,’ Int. J. Heat Mass Transfer, 194, pp. 123163:1-11, 2022. pdf

114. Patel, P.¹, Rane, R.¹, Mrinal, M., Ganesan, V., Taylor, R., Jain, A., ‘Characterization of the Effect of In-process Annealing using a Novel Print Head Assembly on the Ultimate Tensile Strength & Toughness of Fused Filament Fabrication (FFF) Parts,’ Virtual & Physical Prototyping, 17, pp. 989-1005, 2022. (1 = equal contributions). pdf

113. Krishnan, G.¹, Jain, A.¹, ‘Derivation of multiple but finite number of imaginary eigenvalues for a two-layer diffusion-reaction problem,’ Int. J. Heat Mass Transfer, 194, pp. 123037:1-7, 2022. (1 = equal contributors) pdf

112. Ganesan, V., Ameri, A., Jain, A., ‘Discrete Element Modeling (DEM) simulations of powder bed densification using horizontal compactors in metal additive manufacturing,’ Powder Techol., 405, pp. 117557:1-11, 2022. pdf

111. Parhizi, M., Jain, A., Kilaz, G., Ostanek, J., ‘Accelerating the numerical solution of thermal runaway in Li-ion batteries,’ J. Power Sources, 538, pp. 231531:1-12, 2022. pdf

110. Mostafavi, A., Jain, A., ‘Thermal management effectiveness and efficiency of a fin surrounded by a Phase Change Material (PCM),’ Int. J. Heat Mass Transfer, 191, pp. 122630:1-11, 2022. pdf

109. Krishnan, G., Parhizi, M., Jain, A., ‘Eigenfunction-based solution for solid-liquid phase change heat transfer problems with time-dependent boundary conditions,’ Int. J. Heat Mass Transfer, 189, pp. 122693:1-12, 2022. pdf

108. Jain, A., McGinty, S., Pontrelli, G., ‘Theoretical Modeling of Endovascular Drug Delivery into a Multilayer Arterial Wall from a Drug-Coated Balloon,’ Int. J. Heat Mass Transfer, 187, pp. 122572:1-17, 2022. pdf

107. Jain, A., McGinty, S., Pontrelli, G., ‘Drug diffusion and release from a bioerodible spherical capsule,’ Int. J. Pharmaceut., 616, pp. 121442:1-8, 2022. pdf

106. Qasaimeh, M., Ravoori, D., Jain, A., Adnan, A., ‘Modeling the effect of in situ nozzle-integrated compression on the void reduction and filament-filament adhesion in Fused Filament Fabrication (FFF),’ Multiscale Sci. Eng., 4, pp. 37-54, 2022. (DOI: 10.1007/s42493-022-00073-0)

105. Parhizi, M., Kilaz, G., Ostanek, J., Jain, A., ‘Analytical Solution of the Convection-Diffusion-Reaction-Source (CDRS) Equation Using Green’s Function Technique,’ Int. Communic. Heat Mass Transfer, 131, pp. 105869:1-6, 2022. pdf

104. Krishnan, G., Parhizi, M., Torabi, M., Jain, A., ‘Local Thermal Non-Equilibrium (LTNE) Modeling of a Partially Porous Channel with Spatial Variation in Biot Number,’ J. Heat Transfer, 144, pp. 062701:1-10, 2022. pdf

103. Jain, A., Parhizi, M., ‘Theoretical Analysis of Phase Change Heat Transfer and Energy Storage in a Spherical Phase Change Material with Encapsulation,’ Int. J. Heat Mass Transfer, 185, pp. 122348:1-12, 2022. pdf

102. Mishra, D., Shah, K., Jain, A., ‘Investigation of the impact of radiative shielding by internal partitions walls on propagation of thermal runaway in a matrix of cylindrical Li-ion cells,’ J. Electrochem. Soc., 168, pp. 120507:1-12, 2021. pdf

101. Mostafavi, A., Jain, A., ‘Analytical modeling of conjugate heat transfer between a bed of phase change material and laminar convective flow,’ Int. J. Heat Mass Transfer, 183, pp. 122180:1-10, 2022. pdf

100. Parhizi, M., Pathak, M., Ostanek, J., Jain, A., ‘An Analytical Solution Based Iterative Model for Aging Analysis of Li-Ion Cells,’ J. Power Sources, 517, pp. 230667:1-12, 2022. pdf

99. Jogineedi, R., Singireddy, V., Kancharla, S., Salvi, S., Jain, A., Filip, P., ‘Impact of Microstructure and Surface Treatment of Gray Cast Iron Brake Rotors on their Thermal Properties,’ SAE Technical Papers, 2021-01-5106, 2021. pdf

98. Zhou, L., Parhizi, M., Pathak, M., Jain, A., ‘Analytical Modeling of Li-ion Diffusion in a Three-Layer Electrode-Separator-Electrode Stack with Time-Dependent Current,’ Ionics, 28, pp. 1143-1155, 2022. pdf

97. Jain, A., McGinty, S., Pontrelli, G., Zhou, L., ‘Theoretical model for diffusion-reaction based drug delivery from a multilayer spherical capsule,’ Int. J. Heat Mass Transfer, 183, pp. 122072:1-4, 2022. pdf

96. Mostafavi, A., Jain, A., ‘Theoretical Analysis of Unsteady Convective Heat Transfer From a Flat Plate with Time-Varying and Spatially-Varying Temperature Distribution,’ Int. J. Heat Mass Transfer, 183, pp. 122061:1-10, 2022. pdf

95. Jeong, D.-I., Jain, A., Oh, D.-W., ‘Increasing perpendicular alignment in extruded filament by an orifice embedded 3D printing nozzle,’ Virtual & Physical Prototyping, 17, pp. 1-18, 2022. pdf

94. Parhizi, M., Jain, A., ‘Eigenfunction-Based Solution for One-Dimensional Solid-Liquid Phase Change Heat Transfer Problems with Advection,’ Int. J. Therm. Sci., 172, pp. 107262:1-11, 2022. pdf

93. Krishnan, G., Parhizi, M., Pathak, M., Jain, A., ‘Solution Phase Limited Diffusion Modeling in a Li-ion Cell Subject to Concentration-Dependent Pore Wall Flux,’ J. Electrochem. Soc., 168, pp. 090511:1-8, 2021. pdf

92. Jain, A., Parhizi, M., ‘Conditionally Exact Closed-Form Solution for Moving Boundary Problems in Heat and Mass Transfer in the Presence of Advection,’ Int. J. Heat Mass Transfer, 180, pp. 121802:1-9, 2021. pdf

91. Zhou, L., Parhizi, M., Jain, A., ‘Theoretical Modeling of Heat Transfer in a Multilayer Rectangular Body with Spatially-Varying Convective Heat Transfer Boundary Condition,’ Int. J. Therm. Sci., 170, pp. 107156:1-11, 2021. pdf

90. Mishra, D., Shah, K., Jain, A., ‘Investigation of the impact of flow of vented gas on propagation of thermal runaway in a Li-ion battery pack,’ J. Electrochem. Soc., 168, pp. 1-12, 2021. pdf

89. Jain, A., Parhizi, M.¹, Zhou, L.¹, ‘Multilayer One-Dimensional Convection-Diffusion-Reaction (CDR) Problem: Analytical Solution and Imaginary Eigenvalue Analysis,’ Int. J. Heat Mass Transfer, 177, pp. 121465:1-11, 2021. (¹ = Equal Contributions). pdf

88. Zhou, L., Parhizi, M., Jain, A., ‘Theoretical analysis of transient solution phase concentration field in a porous composite electrode with time-dependent flux boundary condition,’ J. Appl. Electrochem., 51, pp. 1241-1252, 2021. pdf

87. Salvi, S., Jain, A., ‘A review of recent research on heat transfer in three-dimensional integrated circuits (3D ICs),’ IEEE Trans. Components Packaging & Manufac. Technol., 11, pp. 802-821, 2021. pdf

86. Prajapati, H., Salvi, S., Ravoori, D., Qasaimeh, M., Adnan, A., Jain, A., ‘Improved print quality in fused filament fabrication through localized dispensing of hot air around the deposited filament,’ Additive Manufacturing, 40, pp. 101917:1-9, 2021. pdf

85. Ravoori, D., Salvi, S., Prajapati, H., Qasaimeh, M., Adnan, A., Jain, A., ‘Void reduction in Fused Filament Fabrication (FFF) through in situ nozzle-integrated compression rolling of deposited filaments,’ Virtual & Physical Prototyping, 16, pp. 146-159, 2021. pdf

84. Mostafavi, A., Jain, A., ‘Unsteady convective heat transfer from a flat plate with heat flux that varies in space and time,’ Int. J. Heat Mass Transfer, 172, pp. 121084:1-8, 2021. pdf

83. Jain, A., Parhizi, M., Zhou, L., Krishnan, G., ‘Imaginary eigenvalues in multilayer one-dimensional thermal conduction problem with linear temperature-dependent heat generation,’ Int. J. Heat Mass Transfer, 170, pp. 120993:1-10, 2021. pdf

82. Mishra, D., Jain, A., ‘Multi-mode heat transfer simulations of the onset and propagation of thermal runaway in a pack of cylindrical Li-ion cells,’ J. Electrochem. Soc., 168, pp. 020504:1-11, 2021. pdf

81. Wood, J., Jain, A., ‘Raceways, rebates, and retrofits: an exploration of several American cities’ policies to facilitate electric vehicle purchase and usage,’ Int. J. Urban & Sustainable Development, 13, pp. 148-58, 2021. pdf

80. Ganesan, V., Jain, A., ‘Computationally-efficient thermal simulations of large Li-ion battery packs using submodeling technique,’  Int. J. Heat Mass Transfer, 165, pp. 120616:1-8, 2021. pdf

79. Parhizi, M., Torabi, M., Jain, A., ‘Local Thermal Non-Equilibrium (LTNE) model for developed flow in porous media with spatially-varying Biot number,’ Int. J. Heat & Mass Transfer, 164, pp. 120538:1-9, 2021. pdf

78. Zhou, L., Parhizi, M., Jain, A., ‘Temperature distribution in a multi-layer cylinder with circumferentially-varying convective heat transfer boundary conditions,’ Int. J. Therm. Sci., 160, pp. 106673:1-12, 2020. pdf

77. Mostafavi, A., Jain, A., ‘Dual-purpose thermal management of Li-ion cells using solid-state thermoelectric elements,’ Int. J. Energy Res., 45, pp. 4303-4313, 2021. pdf

76. Prajapati, H., Ravoori, D., Salvi, S., Jain, A., ‘Measurement of the in-plane temperature field on the build plate during polymer extrusion additive manufacturing using infrared thermometry,’ Polymer Testing, 92, pp. 106866:1-9, 2020. pdf

75. Zhou, L., Parhizi, M., Jain, A., ‘Analytical solution for temperature distribution in a multilayer body with spatially-varying convective heat transfer boundary condition on both ends,’ J. Heat Transfer, 143, pp. 034501:1-8, 2021.

74. Parhizi, M., Jain, A., ‘Analytical modeling of solution phase diffusion in porous composite electrodes under time-dependent flux boundary conditions using Green’s function method,’ Ionics, 27, pp. 213-224, 2021. pdf

73. Salvi, S., Jain, A., ‘Detection of unusual thermal activities in a semiconductor chip using backside infrared thermal imaging,’ ASME J. Electronics Packaging, 143, pp. 020901:1-8, 2021. pdf

72.  Dhakane, A.,  Varshney, V., Liu, J., Heinz, H., Jain, A., ‘Molecular dynamics simulations of separator-cathode interfacial thermal transport in a Li-ion cell,’ Surfaces & Interfaces, 21, pp. 100674:1-8, 2020. pdf

71. Parhizi, M., Pathak, M., Jain, A., ‘Analytical model based prediction of state-of-charge (SoC) of a Lithium-ion cell under time-varying charge/discharge currents,’ J. Electrochem. Soc., 167, pp. 120544:1-10, 2020. pdf

70. Salvi, S., Jain, A., ‘ Measurement of thermal conductivity of millimeter-sized wires using the fin effect,’ Applied Thermal Eng., 178, pp. 115482:1-9, 2020. pdf

69. Parhizi, M., Jain, A., ‘Analytical modeling of solid phase diffusion in single-layer and composite electrodes under time-dependent galvanostatic flux boundary condition,’ J. Electrochem. Soc., 167, pp. 060528:1-11, 2020. pdf

68. Mostafavi, A., Parhizi, M., Jain, A., ‘Semi-analytical thermal modeling of transverse and longitudinal fins in a cylindrical phase change energy storage system,’ Int. J. Therm. Sci., 153, pp. 106352:1-12, 2020. pdf

67. MacDonald, M., Annapragada, S.R., Sur, A., Mahmoudi, R., Lents, C., Jain, A., ‘Early design stage evaluation of thermal performance of Battery Heat Acquisition System (BHAS) of a hybrid electric aircraft,’ J. Electrochem. Energy Conversion & Storage, Special Issue on Heat Transfer and Thermal Management in Li-ion Cells and Battery Packs, 17, pp. 021107:1-9, 2020. pdf

66. Rane, R., Kulkarni, A., Prajapati, H., Taylor, R., Jain, A., Chen, V., ‘Post-Process Effects of Isothermal Annealing and Static Uniaxial Loading on the Ultimate Tensile Strength of FDM parts,’ Materials, 13, Special Issue on New Materials and Approaches in Polymer Additive Manufacturing, pp. 352:1-18, 2020.  pdf

65. Mostafavi, A., Parhizi, M., Jain, A., ‘Theoretical modeling and optimization of fin-based enhancement of heat transfer into a phase change material,’ Int. J. Heat Mass Transfer, 145, pp. 118698:1-10, 2019. pdf

64. Parhizi, M., Jain, A., ‘The impact of thermal properties on performance of phase change based energy storage systems,’ Applied Thermal Engineering, 162, pp. 114154:1-10, 2019. pdf

63. Ravoori, D., Prajapati, H., Talluru, V., Adnan, A., Jain, A., ‘Nozzle-integrated pre-deposition and post-deposition heating of previously deposited layers in polymer extrusion based additive manufacturing,’ Additive Manufacturing, 28, pp. 719-726, 2019. pdf

62. Parhizi, M., Jain, A., ‘Theoretical modeling of a phase change heat transfer problem with a pre-melted or pre-solidified region,’ Int. J. Heat Mass Transfer, 136, pp. 635-643, 2019. pdf

61. Prajapati, H., Chalise, D., Ravoori, D., Taylor, R.M., Jain, A., ‘Improvement in build-direction thermal conductivity in extrusion-based polymer additive manufacturing through thermal annealing,’ Additive Manufacturing, 26, pp. 242-249, 2019. pdf

60. Prasad, A., Parhizi, M., Jain, A., ‘Experimental and numerical investigation of heat transfer in Li-ion battery pack of a hoverboard,’ International Journal of Energy Research, 43, pp. 1802-1814, 2019. pdf

59. Shah, K., Jain, A., ‘Prediction of thermal runaway and thermal management requirements in cylindrical Li-ion cells in realistic scenarios,’ International Journal of Energy Research, 43, pp. 1827-1838, 2019. pdf

58. Ravoori, D., Lowery, C., Prajapati, H., Jain, A., ‘Experimental and theoretical investigation of heat transfer in platform bed during polymer extrusion based additive manufacturing,’ Polymer Testing, 73, pp. 439-446, 2019. pdf

57. Parhizi, M., Jain, A., ‘Analytical modeling and optimization of phase change thermal management of a Li-ion battery pack,’ Appl. Therm. Eng., b, pp. 229-237, 2019. pdf

56. Parhizi, M., Jain, A., ‘Solution of the phase change Stefan problem with time-dependent heat flux using perturbation method,’ J. Heat Transfer, 141, pp. 024503:1-5, 2019. pdf

55. Prajapati, H., Ravoori, D., Jain, A., ‘Measurement and modeling of filament temperature distribution in the standoff gap between nozzle and bed in polymer-based additive manufacturing,’ Additive Manufacturing, 24, pp. 224-231, 2018. pdf

54. Esho, I.¹, Shah, K.¹, Jain, A., ‘Measurements and modeling to determine the critical temperature for preventing thermal runaway in Li-ion cells,’ Applied Thermal Engineering, 145, pp. 287-294, 2018. (¹=Equal Contributors). pdf

53. Ravoori, D., Alba, L., Prajapati, H., Jain, A., ‘Investigation of process-structure-property relationships in polymer extrusion based additive manufacturing through in situ high speed imaging and thermal conductivity measurements,’ Additive Manufacturing, 23, pp. 132-139, 2018. pdf

52. Ahmed, M., Shaik, S., Jain, A., ‘Measurement of radial thermal conductivity of a cylinder using a time-varying heat flux method,’ Int. J. Therm. Sci., 129, pp. 301-308, 2018. pdf

51. Prajapati, H., Ravoori, D., Woods, R.L., Jain, A., ‘Measurement of anisotropic thermal conductivity and inter-layer thermal contact resistance in polymer fused deposition modeling (FDM),’ Additive Manufacturing, 21, pp. 84-90, 2018. pdf

50. Parhizi, M., Ahmed, M.B., Jain, A., ‘Determination of the core temperature of a Li-ion cell during thermal runaway,’ J. Power Sources, 370, pp. 27-35, 2017. pdf

49. Chalise, D., Shah, K., Prasher, R., Jain, A., ‘Conjugate heat transfer analysis of thermal management of a Li-ion battery pack,’ ASME J. Electrochem. Energy Storage Conversion, 15, pp. 011008:1-8, 2018. pdf

48. Vishwakarma, V., Jain, A., ‘Enhancement of thermal transport in Gel-Polymer Electrolytes with embedded BN/Al2O3 nano- and micro-particles,’ J. Power Sources, 362, pp. 219-227, 2017. pdf

47. Chalise, D., Shah, K., Halama, T., Komsiyska, L., Jain, A., ‘An experimentally validated method for temperature prediction during cyclic operation of a Li-ion cell,’ Int. J. Heat Mass Transfer, 112, pp. 89-96, 2017. pdf

46. Luhar, S., Sarkar, D., Jain, A., ‘Steady state and transient analytical modelling of non-uniform convective cooling of a microprocessor chip due to jet impingement,’ Int. J. Heat Mass Transfer, 110, pp. 768-777, 2017. pdf

45. Shah, K., Balsara, N., Banerjee, S., Chintapalli, M., Cocco, A.P., Chiu, W.K.S., Lahiri, I., Martha, S., Mistry, A., Mukherjee, P., Ramadesigan, V., Sharma, C., Subramanian, V.R., Mitra, S., Jain, A., ‘State-of-the-art and future research needs for multiscale analysis of Li-ion cells,’ ASME J. Electrochem. Energy Storage Conversion, 14, pp. 020801:1-17, 2017. pdf

44. Anthony, D., Wong, D., Wetz, D., Jain, A., ‘Non-invasive measurement of internal temperature of a cylindrical Li-ion cell during high-rate discharge,’ Int. J. Heat Mass Transfer, 111, pp. 223-231, 2017. pdf

43. Choobineh, L., Jones, J., Jain, A., ‘Experimental and numerical investigation of inter-die thermal resistance in 3D ICs,’ J. Electron. Packag., 139, pp. 020908:1-6, 2017. pdf

42. Anthony, D., Wong, D., Wetz, D., Jain, A., ‘Improved thermal performance of a Li-ion cell through heat pipe insertion,’ J. Electrochem. Soc., 164, pp. A971-976, 2017. pdf

41. Anthony, D., Sarkar, D., Jain, A., ‘Non-invasive, transient determination of the core temperature of a heat-generating solid body,’ Scientific Reports, 6, pp. 35886:1-10, 2016. pdf

40. Shah, K., Chalise, ,D., Jain, A., ‘Experimental and theoretical analysis of a method to predict thermal runaway in Li-ion cells,’ J. Power Sources, 330, pp. 167-174, 2016. pdf

39. Shah, K.¹, Vishwakarma, V.¹, Jain, A., ‘Measurement of multiscale thermal transport phenomena in Li-ion cells: A review,’ ASME. J. Electrochem. Energy Conv. Storage., 13, pp. 030801:1-13, 2016. (¹=Equal Contributors). pdf

38. Ostanek, J., Shah, K., Jain, A., ‘Measurement sensitivity analysis of transient hot source sensors,’ ASME J. Therm. Sci. & Eng. Appl. , 9, pp. 011002:1-12, 2017. pdf

37. Yao, J., Tchafa, F.E.M., Jain, A., Tjuatja, S., Huang, H., ‘Far-field interrogation of microstrip patch antenna for temperature sensing without electronics,’ IEEE Sensors J., 16, pp. 7053-7060, 2016. pdf

36. Shah, K., McKee, C., Chalise, D., Jain, A., ‘Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes,’ Energy, 113, pp. 852-860, 2016. pdf

35. Black, B., Vishwakarma, V., Dhakal, K., Bhattarai, S., Pradhan, P., Jain, A., Kim, Y-T., Mohanty, S., ‘Spatial temperature gradients guide axonal outgrowth,’ Scientific Reports , 6, pp. 29786:1-12, 2016. pdf

34. Anthony, D., Sarkar, D., Jain, A., ‘Contactless, non-intrusive core temperature measurement of a solid body in steady-state,’ Int. J. Heat Mass Transfer, 101, pp. 779-788, 2016. pdf

33. Sarkar, D., Jain, A., Goldstein, R., Srinivasan, V., ‘Corrections for lateral conduction error in steady-state heat transfer measurements,’ Int. J. Therm. Sci., 109, pp. 413-423, 2016. pdf

32. Sarkar, D., Haji-Sheikh, A., Jain, A., ‘Thermal conduction in an orthotropic sphere with circumferentially varying convection heat transfer,’ Int. J. Heat Mass Transfer, 96, pp. 406-412, 2016. pdf

31. Vishwakarma, V., Waghela, C., Wei, Z., Prasher, R., Nagpure, S.C., Li, J., Liu, F., Daniel, C., Jain, A., ‘Heat transfer enhancement in a Lithium-ion cell through improved material-level thermal transport,’ J. Power Sources, 300, pp. 123-131, 2015. pdf

30. Vishwakarma, V., Waghela, C., Jain, A., ‘Measurement of out-of-plane thermal conductivity of substrates for flexible electronics and displays,’ Microelectronic. Eng., 142, pp. 36-39, 2015. pdf

29. Shah, K., Jain, A., ‘An iterative, analytical method for solving conjugate heat transfer problems,’ Int. J. Heat Mass Transfer, 90, pp. 1232-1240, 2015. pdf

28. Sarkar, D., Haji-Sheikh, A., Jain, A., ‘Temperature distribution in multi-layer skin tissue in presence of a tumor,’ Int. J. Heat Mass Transfer, 91, pp. 602-610, 2015. pdf

27. Drake, S., Martin, M., Wetz, D.A., Ostanek, J.K., Miller, S.P., Heinzel, J.M., Jain, A., ‘Heat generation rate measurement in a Li-ion cell at large C-rates through temperature and heat flux measurements,’ J. Power Sources 285, pp. 266-273, 2015. pdf

26. Shah, K., Jain, A., ‘Modeling of steady-state and transient thermal performance of a Li-ion cell with an axial fluidic channel for cooling,’ Int. J. Energy Res. , 39, pp. 573-584, 2015. pdf

25. Choobineh, L., Jain, A., ‘An explicit analytical model for rapid computation of temperature field in a three-dimensional integrated circuit (3D IC),’ Int. J. Therm. Sci., 87, pp. 103-109, 2015. pdf

24. Gu, L., Black, B., Ordonez, S., Mondal, A., Jain, A., Mohanty, S., ‘Microfluidic control of axonal guidance,’ Scientific Reports, 4, pp. 6457:1-6, 2014. pdf

23. Vishwakarma, V., Jain, A., ‘Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method’, J. Power Sources, 272, pp. 378-385, 2014. pdf

22. Sarkar, D., Shah, K., Haji-Sheikh, A., Jain, A., ‘Analytical modeling of temperature distribution in an anisotropic cylinder with circumferentially-varying convective heat transfer’, Int. J. Heat Mass Transfer, 79, pp. 1027-1033, 2014. pdf

21. Shah, K., Drake, S.J., Wetz, D.A., Ostanek, J.K., Miller, S.P., Heinzel, J.M., Jain, A., ‘An experimentally validated transient thermal model for cylindrical Li-ion cells’, J. Power Sources, 271, pp. 262-268, 2014. pdf

20. Shah, K., Drake, S.J., Wetz, D.A., Ostanek, J.K., Miller, S.P., Heinzel, J.M., Jain, A., ‘Modeling of steady-state convective cooling of cylindrical Li-ion cells’, J. Power Sources, 258, pp. 374-381, 2014. pdf

19. Drake, S.J., Wetz, D.A., Ostanek, J.K., Miller, S.P., Heinzel, J.M., Jain, A., ‘Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells,’ J. Power Sources, 252, pp. 298-304, 2014. pdf

18. Huang, Z., Jones, R.E., Jain, A., ‘Experimental investigation of electromigration failure in Cu-Sn-Cu micropads in 3D integrated circuits,’ Microelec. Eng., 122, pp. 46-51, 2014. pdf

17. Mirza, F., Naware, G., Jain, A., Agonafer, D., ‘Effect of through-silicon-via Joule heating on device performance for low-powered mobiles applications’, Trans. ASME J. Electron. Packag., 136, pp. 041009, 2014. pdf

16. Lingam, D., Parikh, A.R., Huang, J., Jain, A., Minary-Jolandan, M., ‘Nano/microscale pyroelectric energy harvesting: Challenges and opportunities,’ Int. J. Smart Nano. Mater., 4, pp. 1-17, 2013. pdf

15. Banait, A., Vishwakarma, V., Choobineh, L., Jain, A., ‘Thermally-assisted spatially-directed pore formation in Polydimethylsiloxane (PDMS)’, Applied Physics Letters, 103, pp. 153702:1-5, 2013. pdf

14. Patel, B., Jain, A., ‘Thermal Modeling and Design of Ultra-Violet Nanoimprint Lithography’, ASME Journal of Manufacturing Science and Engineering, Special Issue on Thermally Assisted Manufacturing, 135, pp. 064501:1-5, 2013. pdf

13. Choobineh, L., Jain, A., ‘Determination of Temperature Distribution in Three-Dimensional Integrated Circuits (3D ICs) with Unequally-Sized Die’, Applied Thermal Engineering, 56, pp. 176-184, 2013. pdf

12. Choobineh, L., Jain, A. ‘Analytical solution for steady-state and transient temperature field in vertically integrated three-dimensional integrated circuits (3D ICs)’, IEEE Trans Components & Packaging Technologies, 2, pp. 2031-2039, 2012. pdf

11. Javed, A., Iqbal, S., Jain, A., ‘Microheater platform for selective detachment of DNA’, Appl. Phys. Lett., 101, 093707, 2012. pdf

10. Jain, A., Alam, S.M., Pozder, S., Jones, R.E., ‘Thermal-electrical co-optimisation of floorplanning of three-dimensional integrated circuits under manufacturing and physical design constraints’, IET Computers & Digital Techniques, 5, pp. 169-178, 2011. pdf

9. Jain, A., Goodson, K.E., ‘Thermal microdevices for biological and biomedical applications’, J. Thermal Biol., 36, 2011, pp. 209-218. pdf

8. Jain, A., Jones, R.E., Chatterjee, R., Pozder, S., Huang, Z., ‘Analytical and numerical modeling of the thermal performance of three-dimensional integrated circuits’, IEEE Trans. Components & Packaging Technologies, 33, pp. 56-63, 2010. pdf

7. Savidis, I., Alam, S.M., Jain, A., Pozder, S., Jones, R.E., Chatterjee, R., ‘Electrical modeling and characterization of through-silicon vias (TSVs) for 3D integrated circuits’, Microelectronics J., 41, pp. 9-16, 2010. pdf

6. Alam, S.M., Jones, R.E., Pozder, S., Chatterjee, R., Jain, A., ‘Interstratum connection design considerations for cost-effective 3-D system integration’, IEEE Trans VLSI Systems, 18, pp. 450-460, 2010. pdf

5. Jain, A., Ness, K., Goodson, K.E., ‘Theoretical and experimental investigation of spatial temperature gradient effects on cells’, Sensors & Actuators B: Chemical, 143, pp. 286-294, 2009. pdf

4. Kodama, T., Jain, A., Goodson, K.E., ‘Heat conduction through a DNA-Gold composite’, Nano Lett., 9, pp. 2005-2009, 2009. pdf

3. Jain, A., Goodson, K.E., ‘Measurement of thermal conductivity and heat capacity of free-standing thin films using the 3-omega method’, ASME J. Heat Transfer, 130, pp. 1-7, 2008. pdf

2. Hu, X., Jain, A., Goodson, K.E., ‘Investigation of the natural convection boundary condition in microfabricated structures’, Intl. J. Thermal Sciences, 47, pp. 820-824, 2008. pdf